Analisis Literatur: Implikasi Sosial dan Keselamatan Kerja dari Penggunaan Grass Cutter Ergonomis di Perkebunan Sawit
DOI:
https://doi.org/10.64690/jhuse.v1i6.298Keywords:
Ergonomic Grass Cutter, Occupational Safety, Oil Palm Plantations, Social Implications, Occupational HealthAbstract
The use of grass cutters in oil palm plantations is a crucial activity in weed control, which can impact land productivity and worker well-being. However, the use of non-ergonomic tools carries the risk of health problems such as musculoskeletal injuries, excessive fatigue, and decreased work efficiency. This literature analysis aims to explore the social and occupational safety implications of implementing ergonomic grass cutter designs in oil palm plantations. The method used is a literature review of national and international journals published between 2015 and 2024, focusing on ergonomics, occupational health, and socioeconomic impacts in the plantation sector. The analysis results indicate that the use of ergonomic grass cutters can improve work comfort, reduce the risk of injury, and increase worker productivity. In addition, improved tool design also has a positive impact on social relations between workers, reducing absenteeism, and increasing income due to more optimal work results. The main challenges identified are limited access to ergonomic tools, lack of training, and relatively high initial investment costs. This study recommends the need for policy interventions and training support for workers to optimize the benefits of ergonomic grass cutters. In conclusion, the application of ergonomic technology in oil palm plantations is not only relevant for occupational safety but also contributes to social sustainability and worker well-being.
References
Blüher, A., Müller, T., & Schneider, J. (2022). Ergonomic interventions to reduce musculoskeletal disorders in agriculture. Applied Ergonomics, 102, 103748.
Braun, V., & Clarke, V. (2019). Reflecting on reflexive thematic analysis. Qualitative Research in Sport, Exercise and Health, 11(4), 589–597. https://doi.org/10.1080/2159676X.2019.1628806
Bridger, R. S. (2018). Introduction to Human Factors and Ergonomics (4th ed.). CRC Press.
Carter, J., & Wilson, P. (2022). Workplace ergonomics and attendance patterns in agricultural labor. Journal of Agricultural Safety, 14(3), 211–224.
Dul, J., & Weerdmeester, B. (2019). Ergonomics for Beginners: A Quick Reference Guide. CRC Press.
Fernández, R., Gómez, L., & Martinez, P. (2022). Ergonomic interventions in agricultural work: Social and health impacts. Journal of Occupational Health, 64(2), 145–158. https://doi.org/10.1002/jooh.12245
Hartono, B. (2024). Distribusi teknologi dan dampaknya terhadap kesetaraan pekerja perkebunan. Jurnal Teknologi dan Kesehatan Kerja, 12(1), 33–47.
Hignett, S., & Wilson, J. R. (2021). Work-related musculoskeletal disorders: Design and risk management. Ergonomics, 64(5), 643–656.
Johnson, M., & Lee, H. (2020). Ergonomic innovations in agricultural tools and their effects on worker health. Applied Ergonomics, 85, 103056.
Krippendorff, K. (2018). Content Analysis: An Introduction to Its Methodology (4th ed.). SAGE Publications.
Kumar, R., Singh, P., & Mehta, S. (2020). Vibration reduction in handheld agricultural tools: An ergonomic approach. International Journal of Industrial Ergonomics, 75, 102894.
Mahendra, A., & Kusuma, D. (2022). Analisis penerapan prinsip ergonomi pada alat pertanian di Indonesia. Jurnal Teknologi dan Rekayasa Pertanian, 15(2), 85–94.
Mulyadi, D., & Wicaksono, A. (2022). Analisis penerapan ergonomi pada penggunaan alat pemotong rumput di perkebunan. Jurnal Teknik Industri Pertanian Indonesia, 14(2), 121–131.
Nugroho, A. (2023). Ergonomi dalam penggunaan alat pertanian: Tantangan dan peluang di Indonesia. Jurnal Teknologi dan Manajemen Pertanian, 12(2), 145–156.
Pranata, B., & Yuliani, S. (2023). Pengaruh desain alat terhadap kelelahan kerja pada pekerja kebun kelapa sawit. Jurnal Kesehatan Kerja Indonesia, 8(1), 55–66.
Prasetyo, D. (2024). Hubungan penyediaan alat ergonomis dengan tingkat kehadiran pekerja perkebunan. Jurnal K3 dan Ergonomi Indonesia, 9(1), 45–53.
Pratama, R., & Sutanto, H. (2021). Pengaruh desain ergonomis terhadap penurunan risiko cedera pada pekerja perkebunan sawit. Jurnal Teknologi dan Manajemen Agroindustri, 10(1), 55–63.
Rahman, A., & Hidayat, R. (2023). Efektivitas penggunaan grass cutter ergonomis terhadap produktivitas pekerja perkebunan sawit. Jurnal Teknologi Pertanian Terapan, 15(2), 78–87.
Rahman, A., Utami, S., & Santoso, B. (2023). Pengaruh desain ergonomis alat terhadap produktivitas pekerja perkebunan. Jurnal Teknologi dan Kesehatan Kerja, 12(2), 145–158.
Rahman, M. F., & Abdullah, N. (2023). Adjustable handle and vibration reduction in ergonomic grass cutter design. Journal of Agricultural Engineering Research, 187, 45–56.
Siregar, H. (2022). Penerapan prinsip ergonomi pada peralatan pertanian dan dampaknya terhadap kesehatan pekerja. Jurnal Keteknikan Pertanian Indonesia, 20(1), 33–42.
Siregar, M., & Hutapea, R. (2022). Peran sektor perkebunan kelapa sawit terhadap perekonomian Indonesia. Jurnal Agribisnis Tropika, 10(3), 145–158.
Smith, J., & Brown, T. (2021). Ergonomic design and productivity enhancement in agricultural tools. International Journal of Agricultural Ergonomics, 9(1), 45–57.
Smith, R., Adams, T., & Lopez, G. (2021). Ergonomics in agriculture: Reducing absenteeism through better tool design. International Journal of Occupational Health, 27(2), 119–128.
Snyder, H. (2019). Literature review as a research methodology: An overview and guidelines. Journal of Business Research, 104, 333–339. https://doi.org/10.1016/j.jbusres.2019.07.039
Wahyuni, L., & Rachman, M. (2021). Hubungan kenyamanan kerja dengan motivasi pada pekerja sektor pertanian. Jurnal Psikologi Industri, 6(2), 112–124.
Wicaksono, D., & Lestari, M. (2022). Desain ergonomis dan dampaknya terhadap kinerja operator di sektor perkebunan. Jurnal Ergonomi Indonesia, 8(3), 201–214.
Wijayanti, N. (2023). Pengaruh desain alat kerja terhadap kepuasan dan hubungan sosial pekerja. Jurnal Ergonomi Indonesia, 9(3), 201–215.
Wilson, J. R., & Sharples, S. (2020). Evaluation of Human Work (5th ed.). CRC Press.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Arief Panca Putra, Bagus Nugroho, Subakho Aryo Saloko (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
